Get hands-on with our OSB Smartply sample before you commit to full sheets. Cut to approximately 90×90 mm from current OSB3 stock, it lets you evaluate the board’s surface, density, edge quality and screw-holding—so you can specify with confidence for roofing, sheathing, hoarding and internal partitions.
- Structural performance: Engineered OSB3 for load-bearing applications.
- Moisture-resistant: Suitable for interior and protected external use when correctly detailed.
- Finish-friendly: A tight, uniform surface that accepts primers, paints and coatings after light prep.
- Spec certainty: Test fasteners, edges and joint details on a small, convenient piece.
- One ≈90×90 mm OSB Smartply sample taken from live stock.
- Cleanly cut edges so you can inspect strand compaction and bonding.
- A product label for easy reference on site.
Roof decking, wall and floor sheathing, site hoardings, internal partitions, and general construction or DIY projects where a strong, reliable panel is required.
- Material/grade: OSB3 (oriented strand board, moisture-resistant)
- Sample size: Approx. 90 mm × 90 mm
- Finish: Consistent, tight surface; light sanding/priming recommended before painting
- Strength class: Suitable for load-bearing construction when installed to spec
1. Is the sample representative of your full boards?
Yes—it’s cut from the same stock, so you see the exact density and finish you’ll receive.
2. Can I paint or seal OSB Smartply?
Yes. After a light sand and prime, it takes paint and coatings well.
3. Can it be used externally?
OSB3 is moisture-resistant but should be clad or sealed for exposed applications; always follow your project spec.
