Choose flexible plywood full board when your design needs smooth curves and tidy radii. The sheet’s thin, cross-banded plies allow controlled bending along the grain, so you can form curved walls, cabinets, counters and displays with fewer joints and less fuss. Because the faces sand smoothly, finishing with paint, veneer or laminate stays simple.
We stock full boards in 2440 × 1220 mm (and the rotated 1220 × 2440 mm). For tighter or broader curves, pick the thickness that suits the job: 5 mm or 8 mm. If you want to test bend radius first, order a Flexible Plywood Sample.
- Bends cleanly along long- or cross-grain, so curves look consistent.
- Lightweight yet durable, which makes handling, trimming and fixing easier.
- Smooth faces ready to paint, veneer or laminate without heavy prep.
- Fast fabrication: large boards reduce joints and sanding time.
- Curved furniture: concave/convex doors, counters and reception desks
- Interior fit-outs: feature walls, columns, arches and soffits
- Vehicles & marine interiors: vans, campervans and boat linings
- Events & retail: exhibition sets, POS displays and partitions
First, choose thickness by radius: 5 mm forms tighter curves; 8 mm suits gentle arcs. Next, bend with the grain direction indicated on the product page, and laminate multiple layers for strength when needed. Finally, glue to a former or substrate and clamp until fully cured. Always test with a small piece before committing to a large radius.
Before coating, lightly sand the faces. Then apply paint, oil, lacquer or laminate. For the best edges, seal exposed ply and consider a small round-over. Because this material is designed for interiors, use marine or exterior plywood for wet or structural applications when required—see Marine Plywood Full Board or a standard Birch Plywood Full Board for non-curved parts.
- Select your required board size.
- Choose the thickness.
- Select Calculate to view the price.
- Add the board to your basket and proceed to checkout.
1. Is flexi ply waterproof?
No. It’s for interior use. For moisture-heavy areas, choose marine plywood and seal thoroughly.
2. What radius can I achieve?
It depends on thickness, curve direction and lay-up. As a rule, 5 mm bends tighter than 8 mm. Always test a sample
first.
3. Can I screw and glue on curves?
Yes. Use a suitable adhesive and backing former; fix with screws or brads while the glue cures.
4. Do you offer cut to size?
Yes—order the board and add notes at checkout, or browse our shop for other sheet options.
Reviews
There are no reviews yet.