What sizes do plywood sheets come in?

Common boards are 2440×1220 mm (8×4), and Ply Direct can cut to any size you need. Thickness typically ranges from 4–30 mm depending on the material.

How much does a ply sheet cost?

Prices vary by material, thickness and dimensions. Enter your sizes on the product page for a live price or request a quote.

Can I get plywood cut to size?

Yes. Ply Direct offers accurate cutting on professional equipment for clean, splinter-free edges.

How is plywood different from MDF?

Plywood is made from cross-layered veneers for strength and improved moisture performance, while MDF is compressed fibres. Plywood is generally stronger and more moisture resistant.

9mm Buffalo Board | Anti-Slip Phenolic Birch Plywood

9mm Buffalo Board Anti-Slip Mesh Phenolic Birch Plywood Full Board

9mm buffalo board — anti-slip phenolic birch plywood, full board

Choose 9mm buffalo board when you want a light, grippy panel that still carries serious strength. This phenolic birch sheet has a textured anti-slip mesh film on one face and a smooth phenolic film on the reverse. Because the dense birch core is cross-banded, the board stays flat, machines cleanly and holds fixings well. As a result, it’s ideal for vehicle floors, ramps, staging, steps and work platforms where traction and durability matter.

Key benefits

Anti-slip mesh face for safer footing in wet or dusty conditions
Smooth reverse film that wipes clean quickly
Birch throughout core for high load capacity and reliable screw holding
Moisture & abrasion resistance from the phenolic films
Factory-sealed edges; seal any fresh cuts after trimming
Dark brown finish for a smart, consistent look

Need other formats? Try Buffalo Board – Full Board (all thicknesses) or Buffalo Board – Cut to Size.

Mixing materials on the same job? See Birch Plywood Full Board or, for wet/exterior zones, Marine Plywood Full Board.

Typical uses

Vans, trailers and pickups: lightweight, grippy floors
Access platforms & scaffolds: steps, catwalks and decks
Events & staging: high-traffic, non-slip walkways
Workshops & warehouses: ramps, mezzanine walkways and machine bases

Fitting & finishing tips

First, acclimatise boards to site conditions. Next, pre-drill and fix at the recommended centres with the mesh face up. Then leave movement gaps at edges and around upstands. Finally, touch in cut edges with suitable paint or sealant to keep moisture out. Because the reverse is smooth, it also takes adhesive bonding or overlays well.

Frequently Asked Questions

1. Is 9 mm thick enough for floors?
For light-duty floors on close centres, yes. For wider spans or heavy traffic, step up to a thicker buffalo board.

2. Can I CNC cut it?
Absolutely—buffalo board cuts and routes cleanly. Just remember to seal new edges.

3. Is it waterproof?
It’s water-resistant, not fully waterproof. Avoid standing water and seal edges after cutting.

4. Do you deliver nationwide?
Yes—order online for fast UK delivery.