What sizes do plywood sheets come in?

Common boards are 2440×1220 mm (8×4), and Ply Direct can cut to any size you need. Thickness typically ranges from 4–30 mm depending on the material.

How much does a ply sheet cost?

Prices vary by material, thickness and dimensions. Enter your sizes on the product page for a live price or request a quote.

Can I get plywood cut to size?

Yes. Ply Direct offers accurate cutting on professional equipment for clean, splinter-free edges.

How is plywood different from MDF?

Plywood is made from cross-layered veneers for strength and improved moisture performance, while MDF is compressed fibres. Plywood is generally stronger and more moisture resistant.

9mm Buffalo Board Cut to Size | Anti-Slip Phenolic Birch

9mm Buffalo Board Anti-Slip Mesh Phenolic Birch Plywood Cut to size

9mm buffalo board — cut to size for safe, grippy floors

Need 9mm buffalo board pieces that fit first time? We cut phenolic birch sheets to your exact measurements, so you save time and reduce waste. Because the board has a textured anti-slip mesh film on one face and a smooth phenolic film on the reverse, it delivers secure footing and easy cleaning. As a result, it’s ideal for van and trailer floors, ramps, stages, walkways and platforms.

Key features

Anti-slip mesh surface for safer traction—even when wet
Smooth reverse film that wipes clean quickly
Birch-throughout core for solid screw holding and dependable strength
WBP bonding with good moisture and abrasion resistance
CNC-accurate cutting to the millimetre, clearly labelled parts
Edge care: seal any fresh cuts after installation

Need full sheets instead? See Buffalo Board – Full Board.

Comparing materials for the same job? Check Birch Plywood Full Board or, for regular exterior wet areas, Marine Plywood Full Board.

Typical uses

Vehicle & trailer flooring: lightweight, grippy decks
Access ramps & platforms: safe footing for staff and customers
Events & staging: high-traffic walkways and risers
Workshops & warehouses: machine bases and mezzanine paths
Garden rooms & outbuildings: tough, easy-clean floors

How we cut (quick guide)

First, we nest your parts to minimise waste. Next, our CNC saws cut and label every piece. Then we pack flat with corner protection for fast UK delivery. Finally, you fix and seal edges on site for long-term durability.

Fitting tips

Before fixing, acclimatise boards to site conditions. Then pre-drill, use the mesh face up for grip, and fix at the recommended centres. Leave a small expansion gap at walls and upstands. After trimming, touch in edges with suitable paint or sealant to keep moisture out.

Frequently Asked Questions

1. Is 9 mm thick enough for floors?
For light-duty floors on close centres, yes. For wider spans or heavy traffic, step up to 12 mm or 18 mm.

2. Can you cut complex shapes?
Absolutely—we can CNC curves, wheel-arch cut-outs and hatch panels to the millimetre.

3. Is phenolic plywood waterproof?
It’s water-resistant, not fully waterproof. Avoid standing water and always seal cut edges.

4. Do you deliver nationwide?
Yes—order online for fast UK delivery.