Choose 12mm buffalo board when you need a stiffer panel with safe footing and clean edges. We cut every sheet to your exact measurements, so parts fit first time and waste stays low. Because the board has a textured anti-slip mesh film on one face and a smooth phenolic film on the reverse, it grips underfoot yet wipes clean easily. As a result, it excels in van and trailer floors, ramps, platforms, stages and busy walkways.
- 12 mm thickness for higher spans and heavier loads
- Anti-slip mesh surface for safer traction, even when wet
- Smooth reverse film that bonds and cleans quickly
- Birch-throughout core for strong screw holding and durability
- WBP bonding with good moisture and abrasion resistance
- CNC-accurate cutting to the millimetre—clearly labelled parts
- Edge care: seal any fresh cuts after installation
Need full sheets instead? See Buffalo Board – Full Board.
Comparing materials? Check Birch Plywood Full Board or, for regular exterior wet zones, Marine Plywood Full Board.
Lighter build? Try 9mm Buffalo Board – Cut to Size.
- Vehicle & trailer flooring: daily-use decks that resist slips
- Access ramps & platforms: safe footing for staff and customers
- Events & staging: high-traffic walkways and risers
- Workshops & warehouses: mezzanines, machine bases and steps
- Garden rooms & outbuildings: tough, easy-clean floors
First, we nest your parts to minimise waste. Next, CNC saws cut and label each piece for fast placement. Then we pack flat with corner protection for UK-wide delivery. Finally, you fix and seal edges on site for long-term durability.
Before fixing, acclimatise boards to site conditions. Then pre-drill, lay with the mesh face up, and fix at the recommended centres. Leave a small expansion gap at walls and upstands. After trimming, touch in edges with suitable paint or sealant to keep moisture out.
1. Is 12 mm right for vehicle floors?
Yes. It suits close centres and medium-to-heavy duty. For wider spans or heavier loads, consider 18 mm.
2. Can you cut complex shapes?
Absolutely—send drawings for curves, wheel-arch cut-outs and hatches. We cut to the millimetre.
3. Is it waterproof?
It’s water-resistant, not fully waterproof. Avoid standing water and always seal cut edges.
4. Do you deliver nationwide?
Yes—fast UK delivery with protective packaging.
Reviews
There are no reviews yet.